Click here to Skip to main content
14,331,485 members

Five Tips for Floating Point Programming

Rate this:
4.91 (118 votes)
Please Sign up or sign in to vote.
4.91 (118 votes)
26 Jun 2014BSD
This article covers five of the most important things someone needs to know when working with floating point numbers.


There are several traps that even very experienced programmers fall into when they write code that depends on floating point arithmetic. This article explains five things to keep in mind when working with floating point numbers, i.e. float and double data types.

Don't Test for Equality

You almost never want to write code like the following:

double x;
double y;
if (x == y) {...}

Most floating point operations involve at least a tiny loss of precision and so even if two numbers are equal for all practical purposes, they may not be exactly equal down to the last bit, and so the equality test is likely to fail. For example, the following code snippet prints -1.778636e-015. Although in theory, squaring should undo a square root, the round-trip operation is slightly inaccurate.

double x = 10; 
double y = sqrt(x);
y *= y;
if (x == y)
    cout << "Square root is exact\n";
    cout << x-y << "\n";

In most cases, the equality test above should be written as something like the following:

double tolerance = ...
if (fabs(x - y) < tolerance) {...}

Here tolerance is some threshold that defines what is "close enough" for equality. This begs the question of how close is close enough. This cannot be answered in the abstract; you have to know something about your particular problem to know how close is close enough in your context.

Worry about Addition and Subtraction more than Multiplication and Division

The relative errors in multiplication and division are always small. Addition and subtraction, on the other hand, can result in complete loss of precision. Really the problem is subtraction; addition can only be a problem when the two numbers being added have opposite signs, so you can think of that as subtraction. Still, code might be written with a "+" that is really subtraction.

Subtraction is a problem when the two numbers being subtracted are nearly equal. The more nearly equal the numbers, the greater the potential for loss of precision. Specifically, if two numbers agree to n bits, n bits of precision may be lost in the subtraction. This may be easiest to see in the extreme: If two numbers are not equal in theory but they are equal in their machine representation, their difference will be calculated as zero, 100% loss of precision.

Here's an example where such loss of precision comes up often. The derivative of a function f at a point x is defined to be the limit of (f(x+h) - f(x))/h as h goes to zero. So a natural approach to computing the derivative of a function would be to evaluate (f(x+h) - f(x))/h for some small h. In theory, the smaller h is, the better this fraction approximates the derivative. In practice, accuracy improves for a while, but past some point smaller values of h result in worse approximations to the derivative. As h gets smaller, the approximation error gets smaller but the numerical error increases. This is because the subtraction f(x+h) - f(x) becomes problematic. If you take h small enough (after all, in theory, smaller is better) then f(x+h) will equal f(x) to machine precision. This means all derivatives will be computed as zero, no matter what the function, if you just take h small enough. Here's an example computing the derivative of sin(x) at x = 1.

cout << std::setprecision(15);
for (int i = 1; i < 20; ++i)
    double h = pow(10.0, -i);
    cout << (sin(1.0+h) - sin(1.0))/h << "\n";
cout << "True result: " << cos(1.0) << "\n";

Here is the output of the code above. To make the output easier to understand, digits after the first incorrect digit have been replaced with periods.

True result: 0.54030230586814

The accuracy improves as h gets smaller until h = 10<sup>-8</sup>. Past that point, accuracy decays due to loss of precision in the subtraction. When h = 10<sup>-16 </sup>or smaller, the output is exactly zero because sin(1.0+h) equals sin(1.0) to machine precision. (In fact, 1+h equals 1 to machine precision. More on that below.)

(The results above were computed with Visual C++ 2008. When compiled with gcc 4.2.3 on Linux, the results were the same except of the last four numbers. Where VC++ produced zeros, gcc produced negative numbers: -0.017..., -0.17..., -1.7..., and 17....)

What do you do when your problem requires subtraction and it's going to cause a loss of precision? Sometimes the loss of precision isn't a problem; doubles start out with a lot of precision to spare. When the precision is important, it's often possible to use some trick to change the problem so that it doesn't require subtraction, or doesn't require the same subtraction that you started out with.

See the CodeProject article Avoiding Overflow, Underflow, and Loss of Precision for an example of using algebraic trickery to change the quadratic formula into form more suitable for retaining precision. See also comparing three methods of computing standard deviation for an example of how algebraically equivalent methods can perform very differently.

Floating Point Numbers have Finite Ranges

Everyone knows that floating point numbers have finite ranges, but this limitation can show up in unexpected ways. For example, you may find the output of the following lines of code surprising.

float f = 16777216; 
cout << f << " " << f+1 << "\n";

This code prints the value 16777216 twice. What happened? According to the IEEE specification for floating point arithmetic, a float type is 32 bits wide. Twenty four of these bits are devoted to the significand (what used to be called the mantissa) and the rest to the exponent. The number 16777216 is 2<sup>24</sup> and so the float variable f has no precision left to represent f+1. A similar phenomena would happen for 2<sup>53</sup> if f were of type double because a 64-bit double devotes 53 bits to the significand. The following code prints 0 rather than 1.

x = 9007199254740992; // 2^53
cout << ((x+1) - x) << "\n";

We can also run out of precision when adding small numbers to moderate-sized numbers. For example, the following code prints "Sorry!" because DBL_EPSILON (defined in float.h) is the smallest positive number e such that 1 + e != 1 when using double types.

x = 1.0;
y = x + 0.5*DBL_EPSILON;
if (x == y)
    cout << "Sorry!\n";

Similarly, the constant FLT_EPSILON is the smallest positive number e such that 1 + e is not 1 when using float types.

Use Logarithms to Avoid Overflow and Underflow

The limitations of floating point numbers described in the previous section stem from having a limited number of bits in the significand. Overflow and underflow result from also having a finite number of bits in the exponent. Some numbers are just too large or too small to store in a floating point number.

Many problems appear to require computing a moderate-sized number as the ratio of two enormous numbers. The final result may be representable as a floating point number even though the intermediate results are not. In this case, logarithms provide a way out. If you want to compute M/N for large numbers M and N, compute log(M) - log(N) and apply exp() to the result. For example, probabilities often involve ratios of factorials, and factorials become astronomically large quickly. For N > 170, N! is larger than DBL_MAX, the largest number that can be represented by a double (without extended precision). But it is possible to evaluate expressions such as 200!/(190! 10!) without overflow as follows:

x = exp( logFactorial(200) 
       - logFactorial(190) 
       - logFactorial(10) );

A simple but inefficient logFactorial function could be written as follows:

double logFactorial(int n)
    double sum = 0.0;
    for (int i = 2; i <= n; ++i)
        sum += log((double)i);
    return sum;

A better approach would be to use a log gamma function if one is available. See How to calculate binomial probabilities for more information.

Numeric Operations don't Always Return Numbers

Because floating point numbers have their limitations, sometimes floating point operations return "infinity" as a way of saying "the result is bigger than I can handle." For example, the following code prints 1.#INF on Windows and inf on Linux.

x = DBL_MAX;
cout << 2*x << "\n";

Sometimes the barrier to returning a meaningful result has to do with logic rather than finite precision. Floating point data types represent real numbers (as opposed to complex numbers) and there is no real number whose square is -1. That means there is no meaningful number to return if code requests sqrt(-2), even in infinite precision. In this case, floating point operations return NaNs. These are floating point values that represent error codes rather than numbers. NaN values display as 1.#IND on Windows and nan on Linux.

Once a chain of operations encounters a NaN, everything is a NaN from there on out. For example, suppose you have some code that amounts to something like the following:

if (x - x == 0)
    // do something

What could possibly keep the code following the if statement from executing? If x is a NaN, then so is x - x and NaNs don't equal anything. In fact, NaNs don't even equal themselves. That means that the expression x == x can be used to test whether x is a (possibly infinite) number. For more information on infinities and NaNs, see IEEE floating point exceptions in C++.

For More Information

The article What Every Computer Scientist Should Know About Floating-Point Arithmetic explains floating point arithmetic in great detail. It may be what every computer scientist would know ideally, but very few will absorb everything presented there.


  • 24th September, 2008: Original post
  • 29th October, 2008: Added reference, modified code to also compile with gcc, reported VC++ vs gcc difference in one example


This article, along with any associated source code and files, is licensed under The BSD License


About the Author

John D. Cook
President John D. Cook Consulting
United States United States
I work in the areas of applied mathematics, data analysis, and data privacy.

Check out my blog or send me a note.


Comments and Discussions

GeneralRe: Tolerance Of Floating Point Is A Major Headache Pin
supercat930-Oct-08 10:14
membersupercat930-Oct-08 10:14 
GeneralRe: Tolerance Of Floating Point Is A Major Headache Pin
JeffBilkey30-Oct-08 12:40
memberJeffBilkey30-Oct-08 12:40 
GeneralRe: Tolerance Of Floating Point Is A Major Headache Pin
supercat930-Oct-08 13:08
membersupercat930-Oct-08 13:08 
GeneralRe: Tolerance Of Floating Point Is A Major Headache Pin
JeffBilkey30-Oct-08 18:05
memberJeffBilkey30-Oct-08 18:05 
GeneralRe: Tolerance Of Floating Point Is A Major Headache Pin
supercat931-Oct-08 5:04
membersupercat931-Oct-08 5:04 
GeneralRe: Tolerance Of Floating Point Is A Major Headache Pin
JeffBilkey31-Oct-08 13:52
memberJeffBilkey31-Oct-08 13:52 
GeneralRe: Tolerance Of Floating Point Is A Major Headache Pin
supercat931-Oct-08 16:32
membersupercat931-Oct-08 16:32 
GeneralRe: Tolerance Of Floating Point Is A Major Headache Pin
Damir Valiulin3-Nov-08 7:49
memberDamir Valiulin3-Nov-08 7:49 

I also work with CAD and battle tolerance issues on daily basis. Over the years I've learned to stick in tolerance checks even in places I can't imagine that would need it. Proper approach to this problem would be to define acceptable tolerance up front - in your example 1-2mm and stick to it. So, if your units of measurement are mm and I'm assuming maximum problem dimensions do not exceed 100m, then you have about 7 digits of precision that you need to maintain. Any two values that are different after 7th digit would be considered the same for practical reasons.

I'd also store the data in file with at least 2-3 additional precision digits. So, in your case again, you'd want to store values with precision of up to a 1/100 of a mm. Then your results will always be identical on save/load.

For finding parallel lines, I use cross product as supercat9 mentioned:

ux = x2-x1;
uy = y2-y1;
vx = x4-x3;
vy = y4-y3;

cp = ux*vy - uy*vx; //cross product
if (cp<some_tolerance){>
    //lines are parallel

There are lots of published efficient algorithms for line intersections, overlaps, etc. If you are building a serious CAD package you should definitely research this. I'd give some references, but I'm too lazy to check right now. Let me know if you need it.

GeneralRe: Tolerance Of Floating Point Is A Major Headache Pin
JeffBilkey3-Nov-08 10:33
memberJeffBilkey3-Nov-08 10:33 
GeneralRe: Tolerance Of Floating Point Is A Major Headache Pin
Damir Valiulin3-Nov-08 18:01
memberDamir Valiulin3-Nov-08 18:01 
GeneralA few minor points Pin
Andrew Phillips29-Sep-08 15:37
memberAndrew Phillips29-Sep-08 15:37 
GeneralRe: A few minor points Pin
shangomatic30-Sep-08 5:30
membershangomatic30-Sep-08 5:30 
GeneralRe: A few minor points Pin
wtwhite3-Nov-08 14:49
memberwtwhite3-Nov-08 14:49 
GeneralTake a look at these C++ floating point utilities Pin
Simon Hughes29-Sep-08 10:52
memberSimon Hughes29-Sep-08 10:52 
GeneralLogarithms express the floating number Pin
gbb2128-Sep-08 9:40
membergbb2128-Sep-08 9:40 
GeneralRe: Logarithms express the floating number Pin
John D. Cook28-Sep-08 9:59
memberJohn D. Cook28-Sep-08 9:59 
GeneralRe: Logarithms express the floating number Pin
gbb2128-Sep-08 10:04
membergbb2128-Sep-08 10:04 
GeneralExcellent reminder Pin
PatLeCat28-Sep-08 0:02
memberPatLeCat28-Sep-08 0:02 
GeneralIsnt float deprecated Pin
KarstenK25-Sep-08 1:11
mveKarstenK25-Sep-08 1:11 
AnswerRe: Isnt float deprecated Pin
John D. Cook25-Sep-08 6:20
memberJohn D. Cook25-Sep-08 6:20 
GeneralRe: Isnt float deprecated Pin
geoyar29-Sep-08 8:41
membergeoyar29-Sep-08 8:41 
GeneralRe: Isnt float deprecated Pin
harold aptroot29-Sep-08 8:39
memberharold aptroot29-Sep-08 8:39 
GeneralRe: Isnt float deprecated Pin
KarstenK30-Oct-08 21:24
mveKarstenK30-Oct-08 21:24 
GeneralRe: Isnt float deprecated Pin
harold aptroot31-Oct-08 3:06
memberharold aptroot31-Oct-08 3:06 
GeneralRe: Isnt float deprecated Pin
KarstenK31-Oct-08 3:57
mveKarstenK31-Oct-08 3:57 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

Posted 24 Sep 2008


146 bookmarked