|
Depending on how the other game draws itself, you're probably wasting your time. If the other game redraws itself continuously, as do just about every DirectX game out there, then anything you draw on the target form will immediately be overdrawn by the game. At best, your code will have to draw its stuff at the same framerate as the game is drawing (which is usually variable!), and you'll still end up with a horrible flicker that you can't get rid of.
Why? Because your code has no access to the drawing buffer in the game. What you see is two buffers, one is visible that the player see, and the other is behind the scenes, being used to draw the next frame. What that frame is complete, the "pages" are flipped. The newly rendered frame is drawn to the screen and the old buffer is used to render the next frame.
|
|
|
|
|
I see, is there a way to bypass that? A window on top of a game window hides the displaying of that piece of the screen drawing, obviously without flickering (because of the z-layering of Windows itself or so). Can I in some way make draw my screen on top of the game instead of in the same window? Then the screen has to be transparent of course, and because the specific regions that are overdrawn by me, overlap the drawing of the game, Windows will automatically disable that region (as it would do with a normal window on top of another normal window), and no flickering would appear. Still the user has to be able to have the game window itself as the active window, so I'd have to make my semi-transparent window an always-on-top window or so.
I could draw to a zero pointer (IntPtr.Zero), which makes it the most upper layer (thus the whole screen, ignoring other windows). Still I noticed this flickers. =/
Do you think my idea is worth a try? If yes, how would I do that? Or is it impossible to have some decent drawing in/on a game window by a third party program anyway?
Thanks in advance
|
|
|
|
|
Jitse wrote: is there a way to bypass that?
You're kidding, right?
Jitse wrote: A window on top of a game window hides the displaying of that piece of the screen drawing, obviously without flickering (because of the z-layering of Windows itself or so).
This doesn't work the way you think it does. The last process to write to a piece of screen real-estate is the winner, even with "transparent" windows. There are no "layers" in GDI or GDI+. The best you're going to be able to do is draw a small window covering just what you want, but you will not be able to "see through it".
|
|
|
|
|
Seems you were wrong. 
Credit goes to Rui Godinho Lopes. This is the most important piece of code, works with with the user32.dll UpdateLayeredWindow function. Link is at the bottom.
<br />
public void SetBitmap(Bitmap bitmap)<br />
{<br />
IntPtr screenDC = Win32.GetDC(IntPtr.Zero);<br />
IntPtr memoryDC = Win32.CreateCompatibleDC(screenDC);<br />
<br />
IntPtr gdiBitmap = IntPtr.Zero;<br />
IntPtr emptyBitmap = IntPtr.Zero;<br />
<br />
try<br />
{<br />
gdiBitmap = bitmap.GetHbitmap();<br />
emptyBitmap = Win32.SelectObject(memoryDC, gdiBitmap);<br />
<br />
Win32.Point pointSource = new Win32.Point(0, 0);<br />
Win32.Point topPos = new Win32.Point(_form.Left, _form.Top);<br />
Win32.Size size = new Win32.Size(bitmap.Width, bitmap.Height);<br />
Win32.BLENDFUNCTION blendFunc = new Win32.BLENDFUNCTION();<br />
blendFunc.AlphaFormat = Win32.AC_SRC_ALPHA;<br />
blendFunc.BlendFlags = 0;<br />
blendFunc.BlendOp = Win32.AC_SRC_OVER;<br />
blendFunc.SourceConstantAlpha = 255;
<br />
Win32.UpdateLayeredWindow(<br />
_form.Handle,<br />
screenDC,<br />
ref topPos,<br />
ref size,<br />
memoryDC,<br />
ref pointSource,<br />
0,<br />
ref blendFunc,<br />
Win32.ULW_ALPHA);<br />
}<br />
finally<br />
{<br />
Win32.ReleaseDC(IntPtr.Zero, screenDC);<br />
if (gdiBitmap != IntPtr.Zero)<br />
{<br />
Win32.SelectObject(memoryDC, emptyBitmap);<br />
Win32.DeleteObject(gdiBitmap);<br />
}<br />
Win32.DeleteDC(memoryDC);<br />
}<br />
Here's the link: CodeProject: Per Pixel Alpha Blend in C#[^]
|
|
|
|
|
Jitse wrote: Seems you were wrong.
Credit goes to Rui Godinho Lopes. This is the most important piece of code, works with with the user32.dll UpdateLayeredWindow function. Link is at the bottom.
You haven't tried to cover a DirectX window with this yet, have you??
|
|
|
|
|
Dave Kreskowiak wrote: You haven't tried to cover a DirectX window with this yet, have you??
Was already wondering how I could ever know more than an MVP. I was thinking like: "Where's that catch I'm totally missing.". 
Anyway, yes I did. And it works. Hmmmwell, it almost totally works. I've noticed something weird. I tested it with a few game windows, and they all worked perfectly. (If you want to know: Lord of the Rings Online, Pro Evolution Soccer 6, Tibia.) But! With this game called 'Tibia' (don't search it up, it's a horrible game), I can choose what API to render the game with in the advanced graphics options. You can choose two versions of DirectX, and OpenGL. The DirectX rendering works fine, but when I choose OpenGL the PNG images totally get overdrawn, and are not visible anymore.
This is weird though, why would it work with DirectX, but not with OpenGL...?  Or is this just something about the game I tried?
Still, it does seem to work perfectly with the other game windows, there's 0% flickering. And the game I primarily want to make an addon for works as well.
|
|
|
|
|
Jitse wrote: Hmmmwell, it almost totally works.
You can't say I didn't warn you. 
|
|
|
|
|
Dave Kreskowiak wrote: You can't say I didn't warn you.
My way works for any game I tried, except one little unknown game, and only when you choose OpenGL as its rendering. So actually it works very well. You were saying, "did you ever try it on an DirectX window", yes I did, with several games, and it all works perfect.
You don't seem to be able to explain me why it doesn't work for that one certain game when I choose OpenGL, but still works when I choose DirectX 8 or DirectX 5, or that it works with every other game I tried. Anyone else knows what's the reason for this?
|
|
|
|
|
I have an object that is several levels deep. It may or may not contain values in each level. I need to serialize the object as XML -- and yes, I would normally use XmlSerializer to accomplish this. The problem is that the application this is feeding requires an XML format that is not well-formed. The area in which it loses it's well-formedness (is that a word) is with arrays. That is also the area I'm having troubles getting my hands around.
I have my primary code which handles the parent and then creates instances of ObjectWalker and IEnumerableWalker to handle flat objects and arrays. Furthermore the arrays are only System.Collection.ArrayList. So I can specifically state that if property.DeclaringType.Name.Equals("ArrayList") then I know I have an array.
What I'd like to do is get the actual array object and pass it to my IEnumerableWalker, but it seems I cannot do that.
So I'm passing the PropertyInfo of the ArrayList, the object it is contained in, and the current Xml depth. What I cannot find on the internet or here is the next step of iterating through each element in the array and getting the property names and values.
If anyone can point me to a good article or snippet that does this I'd appreciate it!
Thanks
Here is my ObjectWalker that eventually calls an instance of IEnumerableWalker:
public void Walk(object newHierarchy, int depth)
{
Type objectType = newHierarchy.GetType();
XmlWriter.WriteOpen(objectType.Name);
PropertyInfo[] properties = objectType.GetProperties();
foreach (PropertyInfo property in properties)
{
Trace.WriteLine("Processing property" + property.Name);
if (property.DeclaringType.Name.Equals("ArrayList"))
{
new IEnumerableWalker().Walk(property, newHierarchy, depth);
}
else if (property.PropertyType.FullName.StartsWith("MyNamespace"))
{
object itemValue = property.GetValue(newHierarchy, null);
new ObjectWalker().Walk(itemValue, depth+1);
}
else if (property.CanRead && property.CanWrite && property.GetValue(newHierarchy, null) != null )
{
XmlWriter.WriteLine(property.Name, property.GetValue(newHierarchy, null).ToString(), depth);
}
}
XmlWriter.WriteClose(objectType.Name);
}
|
|
|
|
|
i'm not sure if i got what you want.
for now, it seems as if you need to replace
new IEnumerableWalker().Walk(property, newHierarchy, depth);
with something like
foreach (object val in ((ArrayList)property.GetValue(newHierarchy, null)).Items)<br />
{<br />
Walk(val, depth);<br />
}
..or did i get you wrong?
|
|
|
|
|
Almost. But you helped me realize I'm closer than I thought. Seems my base object being passed to the ObjectWalker IS the array list.
So I have to step through and find out why it isn't going to the IEnumerableWalker.
I have the enumerable walker there because this is where the well-formed xml fails. Instead of xml like this:
<pre>
<Employees>
<Employee>
<EmployeeName />
</Employee>
<Employees>
</pre>
They have this
<Employee>
<EmployeeName />
<Employee>
<EmployeeName />
So my IEnumerable object writes all contents of the array but does not create the parent root node of the Array.
really sucks. Don't know how those idiots that wrote the system handle the xml to begin with.
|
|
|
|
|
in this case, i'd consider generating the ouput like
<employees flagArray="true">
<employee>
<employeename />
</employee>
</employees>
and processing xslt transformation later to replace the well-formed array serialisation with desired format.
|
|
|
|
|
It was considered but I did not care to screw around with XSLT. Horrible stuff, IMHO.
But I did get the XmlSerializer working as I needed it. It was just finding where to look to determine the base class of the object. Once I got past that, the rest just flew. It left me with enough time to add the necessary logic to get the attributes, determine if there is an XmlElementAttribute and get the necessary element name. But you post got me headed in the right direction.
Turns out that my problem was caused because I fell into the wrong logic path with the ArrayList. That was due to not looking at the right place for the base object type.
All working. All done.
Thanks for your indirect help.
|
|
|
|
|
in the .NET IDE when you right click on a variable and choose quick watch and it says:
"error: identifier <identifiers name> out of scope "
what does this mean
and how can i resolve this issue?
thanks
robust
|
|
|
|
|
i guess you try to watch a local variable, but in your current execution point this variable is not available (out of scope).
setting a breakpoint where the variable is modified should solve your problem
|
|
|
|
|
I am trying to use C# System.IO.Directory.GetFiles to capture a partial list of the file names in a very large directory. Getting ALL file names can use up all system memory. I cannot find an option or any suggestions to pull files from the directory in a group that would be managable for my application.
I would appreciate any suggestions.
|
|
|
|
|
hm..so which amount of files are you talking about? ten thousands, or hundred thousands?
maybe some code would be helpful, since i cannot really believe aggregating filenames can lead to a memory leak. (btw: how much memory?)
|
|
|
|
|
Hundreds of thousands of files. There are other memory intensive operations taking place at the same time. This is not a memory leak....it is just using up all available memory. BTW there are about 2gb memory.
|
|
|
|
|
you want to capture a partial list of these hundreds of thousands of files.
Directory.GetFiles lets you specify a searchPattern as second parameter. if this doesnt help, specify what describes your desired partial list.
|
|
|
|
|
Partial list cannot be sufficiently identified via filename string. Only reasonable option is to try to grab # of files, process, go back and grab another #.
|
|
|
|
|
I have subclassed a Windows Form TextBox control. Inside my subclass I override the OnKeyDown like this:
protected override void OnKeyDown(KeyEventArgs e)
{
// Trap keystrokes here????
}
Shouldn't this have the effect of inhibiting the user from entering any keystrokes, since I don't pass the event up to the parent method? When I execute and type into the texbox, I see my keystrokes.
I am trying to trap keystrokes this way. What am I doing wrong?
Thanks!
Mark
|
|
|
|
|
MarkMokris,
You have misunderstood what this event does. The event is fired when someone types something, it does not stop or change the users input, since you do nothing in the event. If you want to stop users entering info into a textbox, set it to ReadOnly or Disabled.
Regards,
Gareth.
|
|
|
|
|
Thanks.
But then, is there anyway to trap a keystroke before it appears in the textbox? What if I needed to prohibit certain special characters from being typed?
Thanks again!
Mark
|
|
|
|
|
MarkMokris,
If you want to stop certain user input, use regular expressions or in the KeyStroke event, do some checks and remove whatever you dont want. But it would be better to use regular exp.
Regards,
Gareth.
|
|
|
|
|
MarkMokris wrote: since I don't pass the event up to the parent method
That's done automatically (events use multi-cast delegates).
In OnKeyPress, in your
// Trap keystrokes here????
test for particular characters and set e.Handled to true for the ones you want to ignore.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
