||This article including source code copyright © 2001
Codejock Software, All Rights Reserved. Feel free to
use any of the source code found in this article without
If you are like me sometimes the lack of documentation can be
quite frustrating. Its not enough that you have spend hundreds of
hours building your code and polishing your application, now you
have to search endlessly trying to find the answer to a question
that should already be documented...somewhere...but is not! That
is what I ran into when trying to integrate HTML Help with the
MSDN Collection. I finally figured this one out, but not after
endless hours of research. Hopefully my frustration and research
will benefit those of you who are looking for help with this
MSDN stores information about the HTML help files that it will
use in what is known as a "collection". A collection is
an XML formatted file that contains information about each help
file to be used with MSDN. There are two files that the collection
uses, msdnxxx.col and hhcolreg.dat. The msdnxxx.col
file is the actual collection. This contains a list of all of the
html help titles that are to be used with the collection. The name
of this file typically begins with "msdn" and ends in
".col". The October 2000 collection file name is MSDN030.COL.
The hhcolreg.dat file is the collection's registry. This
file stores specific details about each collection title such as
the location of the HTML help and index files and version number.
The first thing we will need to do is locate both of these files.
Locating the msdnxxx.col file
We will need to look in the system registry to find the
location of the msdnxxx.col file, you can use regedit for
this. If you have the MSDN Library installed you will
find the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTML Help Collections\Developer Collections
This is where Microsoft stores the location of its help
collections. Under this key you will notice an entry for Language.
The value for this key specifies which language the collection is
using. A typical value would be 0x0409 for English,
but may vary depending on your language settings. The next key you
will find is Preferred. This value tells us which
collection is currently the preferred collection for use by MSDN.
A typical value for this would be 0x039a24110 but
may also vary. Under this key we will find an entry for Filename.
This value is the actual location on your hard drive where the
msdnxxx.col file is located.
Locating the hhcolreg.dat file
The next file we need to be concerned with is hhcolreg.dat.
Like the collection file, this also is a XML formatted file, and
contains specific information about your integrated help files. In
older releases of the MSDN Library, this file was located in the Windows\Help
directory. In later releases this has been moved to .\Documents
and Settings\All Users\Application Data\Microsoft\HTML Help\.
Beginning with version 4.71 of the shell32.dll we can make a call
CSIDL_COMMON_APPDATA flag. However
depending on the version of Internet Explorer, this function may
have been moved to ShFolder.dll. For this reason, we have
created our own version of the function called
We can also use the
collectionnum tag found in msdnxxx.col
to determine which directory the hhcolreg.dat is found.
Typically if this value is less than 10000 then the file is
located in the Windows/Help directory.
Editing the collection file
Now that we have located both the msdnxxx.col and hhcolreg.dat
files, we need to examine these files in order to integrate our
data correctly. The first file we are going to look at is the
msdnxxx.col file. Using a text editor, open this file. You will
see two tags at the beginning of the file
collectionnum. These are very important in our
masterlangid tag tells us which
language the collection is using and the collectionnum tag
indicates which collection we are working with. A typical value
for these tags would be:
<masterlangid value=1033/><collectionnum value=10001/>
Each entry in the collection will begin with a
tag and end a
</Folder>. There are three values
that you should be concerned with. Two of them will be
tags and one
LangId tag. The first TitleString tag
value is what you would see when you select the
"Contents" tab when running HTML help. The second
tag value is our collection identifier. This value must be unique
to the collection will be used in the hhcolreg.dat file as
well. The third tag value is
LangId. This value will
be set to the masterlangid tag value that was found at the
beginning of the file.
Here is what a typical collection entry might look like:
<TitleString value="Codejock Software"/>
Editing the registry file
Next we are going to update the hhcolreg.dat file. Open the
file with a text editor. You will notice that each entry begins
<DocCompilation> tag and ends with a
There are six tags that we should be concerned with here. The
tag contains the same value as the second TitleString value
mentioned in the collection. This value is unique to the
collection and must match exactly! The
tag contains the same value as the LangId value mentioned in the
collection. This value must match the
ColNum tag is the collection number. This
value must match collectionnum tag found in msdnxxx.col.
TitleLocation tag contains the full path to where
your *.chm file is located. The
contains the full path to where your *.chi file is located. The
last tag is the Version tag. This is the current version of your
Here is what a typical registry entry might look like:
<TitleLocation value="<font color="#0000FF">[full path]</font>Xtreme.chm"/>
<IndexLocation value="<font color="#0000FF">[full path]</font>Xtreme.chi"/>
Getting it all to work
You will need to generate a .chi index and a binary table of
contents when you compile your HTML help file. Both are
requirements for use with MSDN collections. To do this, you will
need to add "Create CHI file=Yes" and "Binary
TOC=Yes" to your .hhp file under the
section. It is also recommended that you place your .chm and
.chi files in the MSDN collection directory, but this is not a
requirement for your collection to work properly. After you have
completed editing the collection files, open the MSDN Library
collection. Select the index tab to generate the index for your
help title. A dialog will appear informing you that your index is
Tools for creating HTML help
Before you begin the journey into MSDN integration, first you
will need to create your HTML help files. In order to do this you
must have HTML Help Workshop installed on your machine. This
program is what will compile your HTML files into a .chm file.
This program is free and can be downloaded from Microsoft.
I have also found an excellent utility that has saved me
literally hundreds of hours when creating html help documentation.
I would highly recommend you check out the FAR application created
by the Helpware Group. This shareware application is very
reasonably priced and can be downloaded by following
The MSDN Integration Utility
Well if after all of that if you are completely confused, don't
worry, we have an Ace up our sleeves...the MSDN Collection
Integration Utility! This program will actually
integrate your HTML help files for you! Browse to the
location of your .chm and .chi files, supply the title string to
be used in the collection, and define a unique identifier to be
used for your help files. You can use any string you desire for
the unique id, however the safest approach would be to use a GUID
to ensure uniqueness. You can create one automatically by pressing
the "Gen. GUID" button. You also have the option
to set the version label for your help as well. Once you have
defined the required fields, the utility will take care of the
rest by pressing the "Integrate with MSDN collection"
You can download the executable and the complete project source
code. All of the integration code has been encapsulated into a
CMSDNIntegration. You can use this class
with any MFC application to create your own integration utility.
Included with the download is a HTML help file that you can use
to test the program with. The help file is a complete reference
CLoadLibrary class is a wrapper that is
used for loading dll's and determining the version number.