Click here to Skip to main content
16,021,293 members
Articles / Web Development

A Collection of JavaScript Gotchas

Rate me:
Please Sign up or sign in to vote.
4.92/5 (164 votes)
2 Dec 2011CPOL14 min read 429.5K   259   123
A collection of the unusual and unexpected features of JavaScript

Introduction

This article is an introduction to the weird side of JavaScript, and it definitely has a weird side! Software developers who usually write code in another language will find a lot of intriguing "features" when they begin to write code in the world's most widely used language. Hopefully, even seasoned JavaScript developers will find some new gotchas in this article that they can watch out for. Enjoy!

Contents

Functions and Operators

Double-equals

The == operator performs a comparison with type coercion. This means that you can compare objects of two different types and it will attempt to convert them to the same type before performing a comparison. For example:

JavaScript
"1" == 1 //true

However, this is very often misleading, and never needed. In the case above, you can convert the String to a Number and use the type-sensitive triple-equals:

JavaScript
Number("1") === 1; //true

Or, better still, ensure your operands are of the correct type in the first place.

Due to its type-coercing behaviour, double-equals frequently breaks the transitivity rule, which is a little bit scary:

JavaScript
"" == 0 //true - empty string is coerced to Number 0.
0 == "0" //true - Number 0 is coerced to String "0"
"" == "0" //false - operands are both String so no coercion is done.

The above comparisons will all yield false when triple-equals is used.

parseInt doesn't assume base-10

If you omit the second parameter in a call to parseInt, then the base will be determined according to the following rules:

  • By default, assume a radix 10.
  • If the number begins with 0x then assume radix 16.
  • If the number begins with 0 then assume radix 8.

The common mistake is to allow a user-input or suchlike which begins with a 0. Radix 8 (octal) is then used and we see this effect:

JavaScript
parseInt("8"); //8
parseInt("08"); //0

Therefore, always include the second parameter:

JavaScript
parseInt("8", 10); //8
parseInt("08", 10); //8

ECMAScript5 side note: ES5 no longer includes the radix-8 assumption. Additionally, omission of the second parameter helpfully raises a JSLint warning.

String replace

The string replace function only replaces the first match, not all matches as you may expect.

JavaScript
"bob".replace("b", "x"); // "xob"
"bob".replace(/b/, "x"); // "xob" (regular expression version)

To replace all matches, you must use a Regular Expression, and add the global modifier to it:

JavaScript
"bob".replace(/b/g, "x"); // "xox"
"bob".replace(new RegExp("b", "g"), "x"); // "xox" (alternate explicit RegExp)

The global modifier ensures that the replacement does not stop after the first match.

The "+" Operator Both Adds and Concatenates

PHP, another loosely typed language, has the '.' operator for string concatenation. JavaScript does not - so "a + b" always results in concatenation when either of the operands is a string. This might catch you out if you're trying to add a number to, say, the contents of an input element (which will be a string), so you need to first cast to Number:

JavaScript
1 + document.getElementById("inputElem").value; // Concatenates
1 + Number(document.getElementById("inputElem").value); // Adds

Note that the subtract operator attempts to convert the operands to Number:

JavaScript
"3" - "1"; // 2

Although if you're trying to subtract one string from another, then there's probably something wrong with your logic.

Sometimes people try to convert a Number to a string by concatenating with the empty string:

JavaScript
3 + ""; // "3"

But that's not very nice, so use String(3) instead.

typeof

Returns the type of an instance of a fundamental type. Array is actually not a fundamental type, so the typeof an Array object is Object:

JavaScript
typeof {} === "object" //true
typeof "" === "string" //true
typeof [] === "array"; //false

You will get the same result (typeof = "object") when you use this operator against instances of your own objects.

As a side note, "typeof null" yields "object", which is a bit weird.

instanceof

Returns whether the object (or an object in its prototype chain) was constructed using the specified constructor, which is useful when attempting to check the type of one of your own defined object types. However, it is pretty misleading if you create an instance of one of the built-in types using literal syntax:

JavaScript
"hello" instanceof String; //false
new String("hello") instanceof String; //true

Since Array isn't really one of the built-in types (it just pretends to be - hence typeof doesn't work as expected), instanceof does work as expected:

JavaScript
["item1", "item2"] instanceof Array;  //true
new Array("item1", "item2") instanceof Array;  //true

Phew! So in summary, if you want to test the type of a Boolean, String, Number, or Function, you can use typeof. For anything else, you can use instanceof.

Oh, one more thing. Within a function, there is a predefined variable, "arguments", which gives an array of arguments passed to the function. However, it's not really an array, it's an array-like object with a length property, and properties from 0 - length. Pretty strange...but you can convert it to a real array using this common trick:

JavaScript
var args = Array.prototype.slice.call(arguments, 0);

The same goes for NodeList objects returned by DOM calls such as getElementsByTagName - they can also be converted to proper arrays using the above code.

eval

eval interprets a string as code but its use is generally frowned upon. It's slow - when JavaScript is loaded into the browser, it gets compiled into native code; however, every time an eval statement is reached during execution, the compilation engine has to be started up all over again, and that is quite expensive. It looks quite ugly, too, because in most cases it is misused. Additionally, the code being eval'd is executed in the current scope, so it can modify local variables and add stuff to your scope which may be unintended.

Parsing JSON is a common usage; normally people will use "var obj = eval(jsonText);", however almost all browsers now support the native JSON object which you can use instead: "var obj = JSON.parse(jsonText);". There is also the JSON.stringify function for the opposite use. Even better, you can use the jQuery.parseJSON function which will always work.

The setTimeout and setInterval functions can take a string as its first parameter which will be interpreted, so that shouldn't be done either. Use an actual function as that parameter.

Finally, the Function constructor is much the same as eval - the only difference being that it will be executed in the global context.

with

The with statement gives you a shorthand for accessing the properties of an object, and there are conflicting views on whether it should be used. Douglas Crockford doesn't like it. John Resig finds a number of clever uses for it in his book, but also concedes that it has a performance hit and can be a little confusing. Looking at a with block in isolation, it isn't possible to tell exactly what is happening. For example:

JavaScript
with (obj) {
    bob = "mmm";
    eric = 123;
}

Did I just modify a local variable called "bob", or did I set obj.bob? Well, if obj.bob is already defined, then it is reset to "mmm". Otherwise, if there is another bob variable in scope, it is changed. Otherwise the global variable bob is set. In the end, it is just clearer to write exactly what you mean to do.

JavaScript
obj.bob = "mmm";
obj.eric = 123;

ECMAScript5 side note: ES5 strict mode will not support the with statement.

Math.min and Math.max

These are two utility functions that give you the max or min of the arguments. However, if you use them without any arguments, you get:

JavaScript
Math.max(); // -Infinity
Math.min(); // Infinity 

It does make sense really, since Math.max() is returning the largest of an empty list of numbers. But if you're doing that, you're probably after Number.MAX_VALUE or Number.MIN_VALUE.

Types and Constructors

Constructing Built-in Types with the 'new' Keyword

JavaScript has the types Object, Array, Boolean, Number, String, and Function. Each has its own literal syntax and so the explicit constructor is never required.

Explicit (bad)Literal (good)
var a = new Object();
a.greet = "hello";
var a = { greet: "hello" };
var b = new Boolean(true);var b = true;
var c = new Array("one", "two");var c = ["one", "two"];
var d = new String("hello");var d = "hello"
var e = new Function("greeting", "alert(greeting);");var e = function(greeting) { alert(greeting); };

However, if you use the new keyword to construct one of these types, what you actually get is an object of type Object that inherits the prototype of the type you want to construct (the exception is Function). So although you can construct a Number using the new keyword, it'll be of type Object;

JavaScript
typeof new Number(123); // "object"
typeof Number(123); // "number"
typeof 123; // "number"

The third option, the literal syntax, should always be used when constructing one of these types to avoid any confusion.

Constructing Anything Else Without the 'new' Keyword

If you write your own constructor function and forget to include the new keyword, then bad things happen:

JavaScript
var Car = function(colour) {
    this.colour = colour;
};

var aCar = new Car("blue");
console.log(aCar.colour); // "blue"

var bCar = Car("blue");
console.log(bCar.colour); // error
console.log(window.colour); //"blue"

Calling a function with the new keyword creates a new object and then calls the function with that new object as its context. The object is then returned. Conversely, invoking a function without 'new' will result in the context being the global object if that function is not invoked on an object (which it won't be anyway if it's used as a constructor!)

The danger in accidentally forgetting to include 'new' means that a number of alternative object-constructing patterns have emerged that completely remove the requirement for this keyword, although that's beyond the scope of this article, so I suggest some further reading!

There is no Integer

Numerical calculations are comparatively slow because there is no Integer type, only Number - and Number is an IEEE floating point double-precision (64 bit) type. This means that Number exhibits the floating point rounding error:

JavaScript
0.1 + 0.2 === 0.3 //false

Since there's no distinction between integers and floats, unlike C# or Java, this is true:

JavaScript
0.0 === 0; //true

Finally a Number puzzle. How can you achieve the following?

JavaScript
a === b; //true
1/a === 1/b; //false

The answer is that the specification of Number allows for both positive and negative zero values. Positive zero equals negative zero, but positive infinity does not equal negative infinity:

JavaScript
var a = 0 * 1; // This simple sum gives 0
var b = 0 * -1; // This simple sum gives -0 (you could also just
                // do "b = -0" but why would you do that?)
a === b; //true: 0 equals -0
1/a === 1/b; //false: Infinity does not equal -Infinity

Scope

No Block Scope

As you may have noticed in the previous point, there is no concept of block scoping, only functional scoping. Try the following piece of code:

JavaScript
for(var i=0; i<10; i++) {
    console.log(i);
}
var i;
console.log(i); // 10

When i is declared in the for loop, it remains in scope after the loop exits. So the final call to console.log will output 10. There is a JSLint warning which aims to avoid this confusion: forcing all variables to be declared at the start of a function so that it is obvious what is happening.

It is possible to create a scope by writing an immediately-executing function:

JavaScript
(function (){
    for(var i=0; i<10; i++) {
        console.log(i);
    }
}());
var i;
console.log(i); // undefined

There is another twist which becomes apparent when you declare a var before the inner function, and re-declare it within that function. Look at this example:

JavaScript
var x = 3;
(function (){
    console.log(x + 2); // 5
    x = 0; //No var declaration
}());

However, if you re-declare x as a var in the inner function, there is strange behaviour:

JavaScript
var x = 3;
(function (){
    console.log(x + 2); //NaN - x is not defined
    var x = 0; //var declaration
}());

This is because "x" is redefined inside the function. This means that the interpreter moves the var statements to the top of the function and we end up executing this:

JavaScript
var x = 3;
(function (){
    var x;
    console.log(x + 2); //NaN - x is not defined
    x = 0;
}());

Which makes perfect sense!

Global Variables

JavaScript has a global scope which you should use sparingly by namespacing your code. Global variables add a performance hit to your application, since when you access them, the runtime has to step up through each scope until it finds them. They can be accessed and modified either intentionally or by accident by your own code and other libraries. This leads to another, more serious issue - cross-site scripting. If a bad person figures out how to execute some code on your page, then they can also easily interfere with your application itself by modifying global variables. Inexperienced developers constantly add variables to the global scope by accident, and there are a few examples of how that happens throughout this article.

I have seen the following code which attempts to declare two local variables with the same value:

JavaScript
var a = b = 3;

This correctly results in a = 3 and b = 3, however a is in local scope and b is in global scope. "b = 3" is executed first, and the result of that global operation, 3, is then assigned to the local var a.

This code has the desired effect of declaring two local variables with value 3:

JavaScript
var a = 3,
b = a;

'this' and Inner Functions

The 'this' keyword always refers to the object on which the current function was called. However, if the function is not invoked on an object, such as is the case with inner functions, then 'this' is set to the global object (window).

JavaScript
var obj = {
    doSomething: function () {
        var a = "bob";
        console.log(this); // obj
        (function () {
            console.log(this); // window - "this" is reset
            console.log(a); // "bob" - still in scope
        }());
    }
};
obj.doSomething();

However, we have closures in JavaScript so we can just take a reference to 'this' if we want to refer to it in the inner function.

ECMAScript5 side note: ES5 strict mode introduces a change to this functionality whereby 'this' will be undefined instead of being set to the global object.

Miscellaneous

The Absence of data: 'null' and 'undefined'

There are two object states that represent the lack of a value, null and undefined. This is pretty confusing for a programmer coming from another language like C#. You might expect the following to be true:

JavaScript
var a;
a === null; //false 
a === undefined; //true

'a' is in fact undefined (although if you do a double-equals comparison with null then it will be true, but that is just another mistake that results in the code "seeming" to work).

If you want to check that a variable actually has a value, and also follow the rule of never using double-equals, you need to do the following:

JavaScript
if(a !== null && a !== undefined) {
    ...
}

Or, you could do this, which is exactly the same thing (although JSLint will unfortunately complain at you):

JavaScript
if (a != null) {
    ...
} 

"Aha!", you might say. null and undefined are both falsy (i.e., coerced to false) so you can do this:

JavaScript
if(a) {
    ...
}

But, of course, zero is also falsy, and so is the empty string. If one of those is a valid value for 'a', then you will have to use the former, more verbose option. The shorter option can always be used for objects, arrays, and booleans.

Redefining Undefined

That's right, you can redefine undefined, as it isn't a reserved word:

JavaScript
undefined = "surprise!";

However, you can get it back by assigning an undefined variable or using the "void" operator (which is otherwise pretty useless):

JavaScript
undefined = void 0;

...and that's why the first line of the jQuery library is:

JavaScript
(function ( window, undefined ) {
    ... // jQuery library!
}(window));

That function is called with a single parameter ensuring that the second parameter, undefined, is in fact undefined.

By the way, you can't redefine null - but you can redefine NaN, Infinity, and the constructor functions for the built-in types. Try this:

JavaScript
Array = function (){ alert("hello!"); }
var a = new Array();

Of course, you should be using the literal syntax to declare an Array anyway.

Optional Semicolons

Semicolons are optional so that it's easier for beginners to write, but it's pretty yucky to leave them out and doesn't really make anything easier for anyone. The result is that when the interpreter gets an error, it backtracks and tries to guess where the semicolon is supposed to go.

Here is a classic example, courtesy of Douglas Crockford:

JavaScript
return
{
    a: "hello"
};

The above code does not return an object, it returns undefined - and no error is thrown. A semicolon is automatically inserted immediately after the return statement. The remainder of the code is perfectly valid, even if it does not do anything, and this should be evidence enough that in JavaScript, an opening curly brace should go at the end of the current line instead of a new line. It isn't just a matter of style! This code returns an object with a single property "a":

JavaScript
return {
    a: "hello"
};

NaN

The type of NaN (Not a Number) is... Number.

JavaScript
typeof NaN === "number" //true

Additionally, NaN compared to anything is false:

JavaScript
NaN === NaN; // false

Since you can't do a NaN comparison, the only way to test whether a number is equal to NaN is with the helper function isNaN.

As a side note, we also have the helper function isFinite, which returns false when the argument is NaN or Infinity.

The 'arguments' Object

Within a function, you can reference the arguments object to retrieve the list of arguments. The first gotcha is that this object is not an Array but an array-like object (which is an object with a length property, and a value at [length-1]). To convert to a proper array, you can use the array splice function to create an array from the properties in arguments:

JavaScript
(function(){
console.log(arguments instanceof Array); // false 
var argsArray = Array.prototype.slice.call(arguments);
console.log(argsArray instanceof Array); // true 
}());

The second gotcha is that when a function has explicit arguments in its signature, they can be reassigned and the arguments object will also be changed. This indicates that the arguments object points to the variables themselves as opposed to their values; you can't rely on arguments to give you their original values.

JavaScript
(function(a){
    alert(arguments[0]); //1
    a = 2;
    alert(arguments[0]); //2
}(1));

In ES5 strict mode, arguments will definitely point to the original input argument values, as opposed to their current values.

The End!

So that concludes my list of gotchas. I am sure there are more, and I look forward to seeing lots of insightful comments!

P.S. - I do actually like JavaScript.

References

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


Written By
Software Developer Repstor Ltd
United Kingdom United Kingdom
I am a Product Architect at Repstor.

Repstor custodian and Repstor Provisioning Engine provide case management and provisioning for SharePoint.

Repstor affinity provides uninterrupted access to content systems, like SharePoint through the familiar interface of Microsoft Outlook.

Comments and Discussions

 
GeneralRe: Good collection Pin
Jonathan Cardy21-May-11 21:05
Jonathan Cardy21-May-11 21:05 
GeneralHow is this? Pin
After205020-May-11 2:44
After205020-May-11 2:44 
GeneralRe: How is this? Pin
Jonathan Cardy20-May-11 8:27
Jonathan Cardy20-May-11 8:27 
GeneralMy vote of 5 Pin
MBigglesworth7920-May-11 2:14
MBigglesworth7920-May-11 2:14 
GeneralRe: My vote of 5 Pin
Jonathan Cardy20-May-11 8:19
Jonathan Cardy20-May-11 8:19 
GeneralExcellent Pin
R. Giskard Reventlov20-May-11 1:15
R. Giskard Reventlov20-May-11 1:15 
GeneralRe: Excellent Pin
Jonathan Cardy20-May-11 8:19
Jonathan Cardy20-May-11 8:19 
GeneralWow, on top of my bookmark list Pin
Wimmo19-May-11 23:18
Wimmo19-May-11 23:18 
Great article,

Thank you for sharing!
In the race for Article of the Month, got my blessing! Wink | ;-) (Sorry Sacha & Marcelo, your prize cabinets are stuffed already! Wink | ;) )
•Life moves pretty fast. If you don't stop and look around once in a while, you could miss it. — Ferris Bueller

GeneralRe: Wow, on top of my bookmark list Pin
Jonathan Cardy19-May-11 23:37
Jonathan Cardy19-May-11 23:37 
GeneralMy vote of 5 Pin
Abhinav S15-May-11 6:01
Abhinav S15-May-11 6:01 
GeneralRe: My vote of 5 Pin
Jonathan Cardy19-May-11 7:50
Jonathan Cardy19-May-11 7:50 
GeneralNice Pin
BillW3313-May-11 6:39
professionalBillW3313-May-11 6:39 
GeneralRe: Nice Pin
Jonathan Cardy13-May-11 7:19
Jonathan Cardy13-May-11 7:19 
GeneralMy vote of 5 Pin
Andrew Caruth12-May-11 0:23
Andrew Caruth12-May-11 0:23 
GeneralRe: My vote of 5 Pin
Jonathan Cardy12-May-11 4:13
Jonathan Cardy12-May-11 4:13 
GeneralMy vote of 5 Pin
bilo8112-May-11 0:20
bilo8112-May-11 0:20 
GeneralRe: My vote of 5 Pin
Jonathan Cardy12-May-11 4:12
Jonathan Cardy12-May-11 4:12 
GeneralMy vote of 5 Pin
Nagy Vilmos11-May-11 23:16
professionalNagy Vilmos11-May-11 23:16 
GeneralExcellent post Pin
Sam Hogarth11-May-11 21:33
Sam Hogarth11-May-11 21:33 
GeneralRe: Excellent post Pin
Jonathan Cardy11-May-11 21:34
Jonathan Cardy11-May-11 21:34 
GeneralMy vote of 5 Pin
linuxjr11-May-11 8:59
professionallinuxjr11-May-11 8:59 
GeneralRe: My vote of 5 Pin
Jonathan Cardy11-May-11 9:09
Jonathan Cardy11-May-11 9:09 
GeneralMy vote of 5 Pin
ZeeroC00l11-May-11 2:55
ZeeroC00l11-May-11 2:55 
GeneralMy vote of 5 Pin
TweakBird10-May-11 18:00
TweakBird10-May-11 18:00 
GeneralMy vote of 5 Pin
Burak Ozdiken27-Apr-11 11:55
Burak Ozdiken27-Apr-11 11:55 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.