Click here to Skip to main content
12,817,112 members (34,655 online)
Click here to Skip to main content
Add your own
alternative version


195 bookmarked
Posted 2 Aug 2002

Serial Communication in Windows

, 2 Aug 2002
Rate this:
Please Sign up or sign in to vote.
This article gives you a jump start on doing serial communication in Windows NT
<!-- Download Links --> <!-- Add the rest of your HTML here -->


This article is meant to give you a jump start on doing serial communication in Windows (NT family). The article will provide a class called CSerialCommHelper which you can use directly to do serial communication in your application. The class that is provided here with this article does uses overlapped IO. You donot need to know much about serial communication or overlapped IO for this article. However, you need to know some about the synchronization objects like Events and some Windows APIs like WaitForSingleObject and WaitForMultipleObject etc. Also some basic understanding of windows threads is required - like thread creation and termination.


In order for your computer to be able to do serial communication, computer has to have a serial port. Most of the computers have at least one serial port also known as COM port ( communication port ) and are generally called COM1 COM2 etc. Then there are the device drivers for the serial ports. If you think it over, all you that you need to do in serial communication is either send data or receive data. In other words, you are doing input/output (IO) to the serial port. The same IO is done with disk based files. Hence there is no surprise that the APIs for reading and writing to a file apply to serial ports as well. When you send data to the serial port its in terms of bytes but when it leaves the serial port it is in the form of bits. Similarly, when the data arrives at the serial port, its in bit format and when you get data you get it in bytes. 

Without any further discussion lets get started.

Opening the COM port

The first and the foremost step in doing a serial communication is to open the desired port. Lets say you have your device hooked to COM1 you can open the COM port using following API:

HANDLE m_hCommPort = ::CreateFile(szPortName,
            GENERIC_READ|GENERIC_WRITE,//access ( read and write)
            0,    //(share) 0:cannot share the COM port                        
            0,    //security  (None)                
            OPEN_EXISTING,// creation : open_existing
            FILE_FLAG_OVERLAPPED,// we want overlapped operation
            0// no templates file for COM port...

The third fifth and seventh parameters have to be what they are in the above example by law. We want to open the file ( the COM port ) in an overlapped fashion - that's why the sixth param is FILE_FLAG_OVERLAPPED . We will get into the details of overlapped IO a bit later. As you must have guessed from the name , CreateFile API can be used to create a file (disk based) and also it can be used to open an existing file. 

To Windows a serial port or a disk based file both are IO devices . So, in order to open an existing file ( serial port ) all we need to know the name of the device ( COM1) and pass the creation flags as OPEN_EXISTING .

If a COM port is opened successfully, the API returns handle to the com port just like a handle to a file. However, if the system could not open the COM port, it would return INVALID_HANDLE_VALUE . And you can get the reason by calling GetLastError . One of the common errors while opening a COM port is that the COM port is already opened by some other application and in that case you would get ERROR_ACCESS_DENIED (5). Similarly if you by mistake opened a COM port that doesn't exist , you would get ERROR_FILE_NOT_FOUND   as the last error.

Note: Remember not to do make any function calls (like ASSERT) before calling GetLastError or you would get 0. Once you have opened the com port all you need to do now is to start using it.

Reading and Writing

Now, once you have a com port open, you may want to send  some data to the connected device. For example, lets say you want to send "Hello" to the device(e.g., another PC). When you want to send the data across the serial port, you need to write to the serial port just like you would write to a file. You would use following API:

iRet = WriteFile (m_hCommPort,data,dwSize,&dwBytesWritten ,&ov);    

where data contains "Hello" . Lets say in response to your "Hello" , the device sends you "Hi" . So you need to read the data. Again ,you would  use following API:

abRet = ::ReadFile(m_hCommPort,szTmp ,sizeof(szTmp ),
                   &dwBytesRead,&ovRead) ;

For now do not try to understand everything. We will get to all this later. All this sounds very simple. Right?

Now lets start digging into issues.

Issues with serial communication

Just now I said, in response to your "Hello", the device may send you "Hi" back and you would like to read that. But the problem here is that you don't know when the device is going to respond? Or will it ever respond? When should you start to read from the port. One option is that as soon as you made call to WriteFile, you make call to ReadFile . If no data is there you need to make read again later on. This leads to what is called polling. You keep polling the port for data. This model does not really  seem to be a good one. It would be nice if somehow you were notified by the system when data has arrived and only then would you make call to ReadFile. This is event driven approach and fits well into Windows programming. And good news is that such a model is possible .

Another issue with the serial communication is that since it always occurs between two devices, the two devices need to agree on how they talk to each other. Each side needs to follow certain protocols to conduct business. Since its the serial port that actually carries out the communication, we need to configure the serial port. There is an API available for exact same purpose. Following is the API:

SetCommState ( HANDLE hFile, LPDCB lpDCB)

The first parameter is the handle to COM port and the second paramter is what is called device control block (DCB) . The DCB is a struct defined in winbase.h and has 28 data members. For example, we need to specify baud rate at which the COM port operates, you need to set the BaudRate member of the struct . Baud rate is usual 9600 (bps) . But the two devices have to use the same baud rate to conduct business. Similarly if you want to use parity you need to set Parity member of the struct. Again the two devices have to use same parity. Some of the data members are reserved and have to be 0. I have found it easier to get the current DCB struct and then set those members which we are interested in changing. Following code gets the current dcb and sets some of the fields:

DCB dcb = {0};
dcb.DCBlength = sizeof(DCB);

if (!::GetCommState (m_hCommPort,&dcb))
    TRACE ("CSerialCommHelper : Failed to Get Comm State Reason: %d",
    return E_FAIL;

dcb.BaudRate    = dwBaudRate;
dcb.ByteSize    = byByteSize;
dcb.Parity        = byParity;
if ( byStopBits == 1 )
    dcb.StopBits    = ONESTOPBIT;
else if (byStopBits == 2 ) 
    dcb.StopBits    = TWOSTOPBITS;
    dcb.StopBits    = ONE5STOPBITS;

if (!::SetCommState (m_hCommPort,&dcb))
    TRACE ( "CSerialCommHelper : Failed to Set Comm State Reason: %d",
    return E_FAIL;
TRACE ( "CSerialCommHelper : Current Settings, (Baud Rate %d; Parity %d; "
        "Byte Size %d; Stop Bits %d", dcb.BaudRate, 

Most of the time you won't need to change the other fields of this structure. But if you need to change the structure you need to be very careful about the fields as changing the fields will affect the behavior of the serial communication and hence you should be very sure what you want to change. 

Event Driven Approach

Coming back to our earlier problem with the reading of data. If we do not want to  keep polling the COM port for any data then we need to have some kind of event mechanism available. Fortunately there is a way that you can ask the system to notify you when certain events happen. The API to use is

SetCommMask( HANDLE hHandle,DWORD dwEvtMask)

The first parameter is the handle to the open COM port. The second parameter is used to specify a list of events which we are interested in.
The events that need to be specified in the mask depends upon the application needs. For simplicity, lets say we are interested in getting  notified whenever a character arrives at the serial port, we would need to specify EV_RXCHAR as the event mask. Similarly if we are interested to know when all the data has been sent, we need to specify EV_TXEMPTY flag also. So out call would look like this:

SetCommMask( m_hCommPort,EV_TXTEMPTY|EV_RXCHAR);

  The interesting thing here is that although we told system about the events of our interest, we did not however told system what to do when these events occur. Like how would system let us know that a particular event occurred. An obvious thing seems to be a callback mechanism. But there is not such mechanism available. Here is when things get a little tricky. In order for system to let us know about the communication event occurrence, we need to call WaitCommEvent This function waits for the events specified in SetCommMask . But if your think a little more, it sounds like we are turning a notification mechanism back to polling mechanism. Actually its even worse that than . WaitCommEvent blocks till an event occurs. So what's the use of WaitCommEvent ? Well , the answer lies in overlapped IO.
If you look at the WaitCommEvent signature it looks like this:

BOOL WaitCommEvent(HANDLE hCommPort, LPDWORD dwEvtMask,LPOVERLAPPED lpOverlapped);

The third parameter is the key here. 

Think of overlapped IO as asynchronous IO. Whenever a function makes a call and specifies the overlapped IO structure, it means that try to do the current operation but if you are not able to complete it immediately let me know when you are done with this IO. The way system lets you know about the completion is by setting an kernel event object that is part of the lpOverlapped structure. So, all you do is spawn a thread and make the thread wait for that event object using one of the WaitForSingleObject APIs.
Lets look at the overlapped structure:

typedef struct _OVERLAPPED {
    DWORD Internal;
    DWORD InternalHigh;
    DWORD Offset;
    DWORD OffsetHigh;
    HANDLE hEvent;

The last parameter is the event handle that you need to create . This event is generally a manual reset event. When you make a call like WaitCommEvent passing overlapped structure as the last parameter, and the system could not complete call meaning it did not see any characters at the port, it would return immediately but would return FALSE. If you now make a call to GetLastError you would get ERROR_IO_PENDING which means that the call has been accepted but no characters have yet arrived at the COM port. Also it means whenever the characters will arrive, the system will set the hEvent of the overlapped structure that you passed in. So if your thread would wait for single object on hEvent and you pass INFINITE, then whenever your Wait fn. returns WAIT_OBJECT_0 it means some character has arrived  or all the data in the output buffer has been sent.

In our current case since we are interested in more than one events we would need to check what event did we get by making call to GetCommMask and checking the DWORD against each event. Following  pseudo code will explain it:

 You can read the data from the com port and reset the event and make the call to WaitCommEvent again and so on.

unsigned __stdcall CSerialCommHelper::ThreadFn(void*pvParam)
    ov.hEvent = CreateEvent( 0,true,0,0);
    HANDLE arHandles[2];
    arHandles[0] = apThis->m_hThreadTerm;

    DWORD dwWait;
    while (  abContinue )
        BOOL abRet = ::WaitCommEvent(apThis->m_hCommPort,&dwEventMask, &ov) ;
        if ( !abRet )
            ASSERT( GetLastError () == ERROR_IO_PENDING);

        arHandles[1] = ov.hEvent ;
        dwWait = WaitForMultipleObjects (2,arHandles,FALSE,INFINITE);
        switch ( dwWait )
        case WAIT_OBJECT_0:
        case WAIT_OBJECT_0 + 1:
                DWORD dwMask;
                if (GetCommMask(apThis->m_hCommPort,&dwMask) )
                   if ( dwMask & EV_TXEMPTY )
                   TRACE("Data sent");
                   ResetEvent ( ov.hEvent );
                   //read data here and reset ov.hEvent
return 0;

If you understood the above code , you will understand the whole of this article and the source code provided. The above piece of code is simple using the overlapped IO method to do its job.

Once we have received the indication that the data has arrived we need to read the data. Important thing to note here is that the when data arrives at the serial port, it is copied over to system buffer.  The data is removed from the system buffer only when you have read the data using API such as ReadFile .  Like any buffer, system buffer has a limited size. So if you do not read the data from the buffers quick enough the system buffers can be become full if more data is arriving. What happens to further data depends upon the configuration that you have set in the device configuration block (in call to SetCommState ). Usually the applications do some kind of handshaking at the application level but you can also make configurations such that the com port does not accept any further data upon buffer-full events. But all that is beyond the scope of this discussion. If possible its always better to have applications themselves implementing some kind of handshaking  - like do not send next block of data until you get okay for the first block. Generally this kind of handshaking is implemented using some sort of ACK / NAK  and ENQ protocol.

In order for us to read data we need to use ReadFile API. ReadFile API has to specify how much data to read. Lets say we are monitoring character arrivals and 10 characters arrive at the port. As soon as first character arrives at the port the system will set the overlapped structure's event object and out WaitSingleObject will return. Next we would need to read the data. So how much data should we read? Should we read 1 byte or  10 bytes? That is a good question.   The way it works is as follows (Note: this is not documented anywhere but this is what I have found by research on Win2K,NT4.0)  :

When one (or more) characters arrive at the port, the event object associated with the overlapped structure set once. Now lets say that you made a call to read and you read 1 character. After reading 1 character , you would finally Reset the overlapped structure's event object. Now you would go back to the WaitCommEvent but it would return false since no "new" character has arrived. So you will not be able to read any more characters.  Now when another character arrives, system will set the overlapped event and you would read one more character but this time it will be the character that had arrived earlier and you never read. This clearly is a  problem.

So what is the solution? The easiest solution is that as soon as you got the event object indicating the arrival of a character, you should read all the characters that are present in the port. (If you are familiar with win API MsgWaitForMultipleObjects you can draw a analogy here.)

So again the question remains how many characters to read. The answer is read all the characters in a loop using ReadFile. Here is the pseudo code


    WaitCommEvent(m_hCommPort,&dwEventMask, &ov) ;
    if ( WaitForSingleObject(ov.hEvent,INFINITE) == WAIT_OBJECT_0)
        char szBuf[100];
            ReadFile( hPort,szBuf,sizeof(szBuf),&dwBytesRead,&ov);
        }while (dwBytesRead > 0 );    

ReadFile API has following signature:

BOOL ReadFile( HANDLE hFile, // handle to file 
        LPVOID lpBuffer, // data buffer 
        DWORD nNumberOfBytesToRead, // number of bytes to read 
        LPDWORD lpNumberOfBytesRead, // number of bytes read 
        LPOVERLAPPED lpOverlapped // overlapped buffer );

The first parameter is as usual the com port, the last parameter is the overlapped structure. Again we need to create a manual reset event and pass the overlapped structure to the ReadFile function. Again if you issue a read for say 10 bytes and there is no data available , ReadFile will return FALSE and GetLastError will return ERROR_IO_PENDING and the system will set the overlapped event when the overlapped operation(read ) completes. 

As you can see ReadFile returns dwBytesRead which as is clear returns the number of bytes read. If there are no bytes remaining, the dwBytesRead will return 0. Lets say there are 11 bytes that have arrived and you read 10  characters in the first go in while loop. In the first go 10 characters will be returned in dwBytesRead. In the second go with while loop, the dwBytesRead will return 1. Now in the third go the dwBytesRead will return 0 and you will break out of the while loop. This allows you to read all the data. In this approach ,if you noticed, we never really took advantage of the overlapped structure that we passed to the ReadFile function but we still need to pass it because we opened the COM port in Overlapped manner.

And finally when you want to send data to other device, you need to call WriteFile. WriteFile is not even worth discussing.

There is one more thing that needs to be taken into account before we move on and that is communication timeouts. Its important to set the timeout to proper values for things to work. The API to do so is: 

SetCommTimeouts ( HANDLE hCommPort, LPCOMMTIMEOUTS lpCommTimeOuts)

COMTIMEOUTS is a structure with following members:

typedef struct _COMMTIMEOUTS {  
  DWORD ReadIntervalTimeout; 
  DWORD ReadTotalTimeoutMultiplier; 
  DWORD ReadTotalTimeoutConstant; 
  DWORD WriteTotalTimeoutMultiplier; 
  DWORD WriteTotalTimeoutConstant; 

For a description of all these fields consult MSDN documentation. But one thing I want to point out is this: 

"...A value of MAXDWORD , combined with zero values for both the ReadTotalTimeoutConstant and ReadTotalTimeoutMultiplier members, specifies that the read operation is to return immediately with the characters that have already been received, even if no characters have been received..."

This is exactly what we want . We do NOT want the ReadFile to get stuck if there is no data available as we will know with WaitCommEvent API. and also 

"...A value of zero for both the WriteTotalTimeoutMultiplier and WriteTotalTimeoutConstant members indicates that total time-outs are not used for write operations..." 

is what we want. In short we need to do this:

timeouts.ReadIntervalTimeout        = MAXDWORD; 
timeouts.ReadTotalTimeoutMultiplier    = 0;
timeouts.ReadTotalTimeoutConstant    = 0;
timeouts.WriteTotalTimeoutMultiplier    = 0;
timeouts.WriteTotalTimeoutConstant    = 0;

if (!SetCommTimeouts(m_hCommPort, &timeouts))
    TRACE ( "CSerialCommHelper :  Error setting time-outs. %d",GetLastError());
    return E_FAIL;

Now we have discussed almost everything that needs to be discussed for the sake of this article.

Putting it all together 

All this I have put together in a form of two classes: 

  • The main class is CSerialCommHelper - the main class that does performs all the communication .
  • The helper class called CSerialBuffer that is an internal buffer used by the CSerialCommHelper.

Here is the main API of the CSerialCommHelper:

inline bool IsInputAvailable()
inline bool IsConnection() {return m_abIsConnected ;}
inline void SetDataReadEvent() { SetEvent ( m_hDataRx ); }
HRESULT Read_N (std::string& data,long alCount,long alTimeOut);
HRESULT Read_Upto (std::string& data,char chTerminator ,
                   long* alCount,long alTimeOut);
HRESULT ReadAvailable(std::string& data);
HRESULT Write (const char* data,DWORD dwSize);
HRESULT Init(std::string szPortName, DWORD dwBaudRate,BYTE byParity,
             BYTE byStopBits,BYTE byByteSize);
HRESULT Start();

and the interface for CSerialBuffer is :

inline void LockBuffer(); 
inline void UnLockBuffer();
void AddData( char ch ) ;
void AddData( std::string& szData ) ;
void AddData( std::string& szData,int iLen ) ;
void AddData( char *strData,int iLen ) ;
std::string GetData() ;
void Flush();
long Read_N( std::string &szData,long alCount,HANDLE& hEventToReset);
bool Read_Upto( std::string &szData,char chTerm,long &alBytesRead,
                HANDLE& hEventToReset);
bool Read_Available( std::string &szData,HANDLE & hEventToReset);
inline long GetSize() ;
inline bool IsEmpty() ;

 Here is the logic and working behind the classes:

First of let me show you how to use the class. In your application create an object of CSerialCommHelper like this:

CSerialCommHelper m_theCommPort;

Call m_theCommPort.Init() passing in the necessary information. If you want you can use default values.
Next call m_theCommPort.Start() 

If you want to get notification about when the some data is available you can get the kernel event object to wait on by calling  m_theCommPort.GetWaitForEvent().

What CSerialCommHelper does is that on call to Init(), it opens the specified COM port and also starts a thread. The thread starts "listening" for any incoming data and once the data has been received it reads  all the data into a local buffer which is of type CSerialBuffer . Once its done reading all the data it sets the event in case you want to get the notification. Now you have three options

  • read all the data by calling ReadAvailable which reads all the data .
  • read up to some character by calling Read_Upto and passing character up to which you want to read.
  • read N character calling Read_N passing the numbers to be read.

There is one more thing that needs to be paid attention. If you want to read 10 characters  but there are only 5 characters in the local buffer, the read_N makes a blocking call and waits for the timeout passed as the last parameter .  Same is true for Read_Upto.

One more thing. If there are 10 characters in the local buffer but you made a call to Read_N for 5 characters you will be returned first 5 characters. If you made a next call Read_N for 5 characters again, it would returned next 5 characters.

That's all there is to it.

If you think I have left something please feel free to email me at


This article has no explicit license attached to it but may contain usage terms in the article text or the download files themselves. If in doubt please contact the author via the discussion board below.

A list of licenses authors might use can be found here


About the Author

Ashish Dhar
United States United States
No Biography provided

You may also be interested in...

Comments and Discussions

GeneralRe: TX Buffer Problem Pin
Trollslayer6-Mar-06 3:01
memberTrollslayer6-Mar-06 3:01 
GeneralSerial Comm Pin
urooj khan8-Feb-05 14:44
sussurooj khan8-Feb-05 14:44 
QuestionReadAvailable() and threads? Pin
Michael Swan28-Oct-04 12:49
memberMichael Swan28-Oct-04 12:49 
AnswerRe: ReadAvailable() and threads? Pin
jaychou_yql9-Jun-08 3:05
memberjaychou_yql9-Jun-08 3:05 
GeneralExcellent Pin
bpark16-Oct-04 6:03
memberbpark16-Oct-04 6:03 
GeneralUSB to serial Pin
Stefan7718-Aug-04 3:41
memberStefan7718-Aug-04 3:41 
GeneralRe: USB to serial Pin
soundman3219-Dec-04 22:53
membersoundman3219-Dec-04 22:53 
GeneralRe: USB to serial Pin
prcarp21-Jan-05 8:15
memberprcarp21-Jan-05 8:15 
I agree, the USB-Serial drivers are not great. I use WinXP/SP2 on a laptop with no DB9 connections so I am stuck with one of these. The USB/serial driver will completely lock up the machine (i.e. CTRL-ALT-DEL doesn't even work) on certain occassions. My program used simple ReadFile/WriteFile commands with overlapped I/O pretty much like this author described.

The only way around this for me was not to use overlapped I/O. It seems that if I do a blocking read in a worker thread, and skipped the whole overlapped thing, everything is fine. To shutdown the thread, I close the handle that the ReadFile was using and trap the error. Not clean but it was the only way I could get it to work.
Generalfatal error C1010 Pin
soul-reaver16-Jul-04 3:08
membersoul-reaver16-Jul-04 3:08 
GeneralRe: fatal error C1010 Pin
slek70613-Oct-04 16:26
sussslek70613-Oct-04 16:26 
GeneralRe: fatal error C1010 Pin
tfloto3-Dec-04 12:18
membertfloto3-Dec-04 12:18 
GeneralCPU Usage when working with WriteFile Pin
Yossi Shachar5-Jul-04 2:25
memberYossi Shachar5-Jul-04 2:25 
GeneralRe: CPU Usage when working with WriteFile Pin
soundman3219-Dec-04 23:08
membersoundman3219-Dec-04 23:08 
Generaldialog based apllication interaction Pin
moto muzphee6-Jun-04 0:39
membermoto muzphee6-Jun-04 0:39 
GeneralSerial - managed code Pin
Anonymous12-May-04 11:45
sussAnonymous12-May-04 11:45 
Generalclaim/release serial port Pin
orfeas2913-Apr-04 0:50
memberorfeas2913-Apr-04 0:50 
GeneralRe: claim/release serial port Pin
Hashamay30-Aug-06 11:32
memberHashamay30-Aug-06 11:32 
GeneralI need your help( my christmas wish) Pin
Goraw17-Dec-03 21:50
memberGoraw17-Dec-03 21:50 
GeneralSolution Required Pin
Josepj17-Nov-03 2:18
memberJosepj17-Nov-03 2:18 
Generalnot able to download Pin
agsachin4-Jun-03 20:59
memberagsachin4-Jun-03 20:59 
GeneralRe: not able to download Pin
agsachin4-Jun-03 21:33
memberagsachin4-Jun-03 21:33 
GeneralMay be a bug... Pin
deryaoktay24-Mar-03 23:53
memberderyaoktay24-Mar-03 23:53 
GeneralRe: May be a bug... Pin
Anonymous20-Nov-03 15:35
sussAnonymous20-Nov-03 15:35 
GeneralUseful link Pin
Alex Farber15-Feb-03 19:44
memberAlex Farber15-Feb-03 19:44 
GeneralThanks Pin
Alex Farber15-Feb-03 19:35
memberAlex Farber15-Feb-03 19:35 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

Permalink | Advertise | Privacy | Terms of Use | Mobile
Web02 | 2.8.170308.1 | Last Updated 3 Aug 2002
Article Copyright 2002 by Ashish Dhar
Everything else Copyright © CodeProject, 1999-2017
Layout: fixed | fluid