Click here to Skip to main content
14,689,370 members
Articles » Languages » C# » Utilities
Posted 27 Jul 2014


43 bookmarked

Passing C/C++ Constants, enums, and structs to C# at compile time

Rate me:
Please Sign up or sign in to vote.
4.81/5 (24 votes)
22 May 2016CPOL
CppHeader2CS: A compile-time tool for converting C/C++ header constants, enums, and structures to C#.


This command line tool extracts C/C++ constants, predefinitions, structs, and enums from a C/C++ header file and then outputs it to a C# file. This tool is not a full featured C/C++ to C# converter - it does not convert functions to C#. This tool is meant to copy header information from a C/C++ file to a C# file so that constants, predefinitions, structs, and enums can be shared between C/C++ project and C# projects. This conversion would typically be done using Visual Studio's pre-build command line events. The goal is to keep one set of constants and enums for both a C/C++ and C# project. These constants and enums are extracted from a given C/C++ file, converted, and are then written to a generated C# file that is usually already added to a C# project. The conversion is extremely quick so it should not have much impact on your total compile time.

Since C# does not support predefinitions at the same level as C/C++, the program converts #define values to C# constants in a default class. Since the C/C++ #define values are typeless, CppHeader2CS tries to figure out the best constant type to use for the C# output. In a nutshell, it first tries parsing an int, followed by a float, followed by bool, and if all else fails it just saves it as a string. Example: #Define cat 5 is translated into public const int cat = 5; whereas #define cat 5.0 is translated into public const float cat = 5;. Any type can also be forced by appending the C2CS_TYPE command in a comment following the #define. For Example, #Define cat 5 // C2CS_TYPE: float is translated to public const float cat = 5;.

To accomplish the conversions Regular Expressions are used to gather the information, then the data is converted into to its C# equivalent and then saved into one of three destination areas. The three C# destination areas are the top, namespace, and class area. (see orange boxes in diagram) StringBuilders are used to gather the converted three areas. The first, 'Top Area' StringBuilder writes to the very top of the C# file. This can be something like using system.IO; and added by using a special command in the C/C++ source file, //C2CS_Top_Write using system.IO;. The second StringBuilder outputs to the namespace area and would typically consist of structs and enums. The final location is in a default class area and this mainly holds constants. In the end, these are merged into one document and are outputted either to a file or to the console. Below you will find an output image with some orange boxes on it. Each orange box represents a StringBuilder.

Sample Image - maximum width is 600 pixels


In the past, I have had many instances where I had a need to pass constants, enums or simple structures from a C/C++ to a C# project. Searching online, I could not find anything that would do what I wanted.  Other solutions were full C/C++ to C# conversions that were too slow to run on each compile. I did find a nice T2 templates project that did some of the stuff I wanted but overall the T2 template was hard to read and do not support the functionality I needed. I decided on a regular expressions approach. RegEx can be a little annoying and hard to read but they work great for some problems.

Using the code

Usage Instructions

  1. Copy the CppHeader2CS.exe file to some location
  2. Open the Project Properties for the C# project and then navigate to the Build Events Section.
  3. In the Pre-build event command line enter something like the following: 
    C:\[tool location]\CppHeader2CS.exe "$(ProjectDir)MyInput.h" "$(ProjectDir)myCppSharedItems.cs"
    Depending on your needs you will need to adjust the file names and locations above. Visual Studio helps with this using the macros button.

Command Line Usage

CppHeader2CS.exe input_file [output_file]
  input_file - this is the C/C++ source header file. It should be a simple file meant for the C/C++ to C# sharing.
  output_file - (optional) This is the name of the C# output file. If a name is not supplied it will use the input filename with a cs extension.

Command List (located in C/C++ source file in comments)

This program supports a number of commands that can be entered in the source file. The commands are added by adding them like comments. Example: // C2CS_TYPE MyType These can be used to write or adjust the output. The three C2CS_*_Write commands can be used to write anything in the C# file using comments in the C/C++ source file. The other options can be used to set a custom namespace or class name as well as force a type or skip a line in the source all together.

// C2CS_TOP_Write text to write - C2CS_TOP_Write is a direct pass-through that writes text above the namespace. This can be useful whenever there is a need to print at the top of the output file. Example: //C2CS_TOP_Write using System.IO;

// C2CS_NS_Write text to write - C2CS_NS_Write is a direct pass-through that writes text above the default class but in the namespace area. This area usually contains enums and structs.

// C2CS_Class_Write text to write - C2CS_Class_Write is a direct pass-through that writes text in the class area. CppHeader2CS writes only to a single class.

// C2CS_Set_Namespace MyNsName - C2CS_Set_Namespace sets the namespace name. This is optional and if unspecified defaults to C2CS.

// C2CS_Set_ClassName MyClass - C2CS_Set_ClassName sets the class name to use. This is optional and if unspecified defaults to Constants.

// C2CS_TYPE MyType - C2CS_TYPE is used in the comments after a #define to specify what type to use. This is required if the automatic detection does not work as expected or the programmer wants to force a type. Example: #Default mySum (2+1) //C2CS_TYPE int;

// C2CS_SKIP - Adding C2CS_SKIP in any comment forces CppHeader2CS to ignore the current line.


Example 1 - #define ->int

#DEFINE Cars 10

...gets added to the class area as...

public const int Cars = 10;
Points of Interest
  • automatically recognized as an int.

Example 2 - #define ->float

#DEFINE MyDouble 3.2

...gets added to the class area as...

public const double MyDouble = 3.2f;
Points of Interest
  • #DEFINE will always get translated to lower case
  • #DEFINE MyFloat 3.2f with the “f” will result in a float output.
  • #DEFINE MyFloat 3.2d with the “d” will result in a double output.
  • when no suffix is given the output will be double
  • scientific notation is supported

Example 3 - #define -> handles very simple expressions

Given my_float is an existing float...

#DEFINE expr1 my_float + 2 

...gets added to the class area as...

public const float expr1 = my_float + 2;
Points of Interest
  • The converter recognized that this must be a float. It is very limited however as it only works with +, -, /, * and for logic true, false, &&, ||
  • If it does not auto-detect as expected, the command // C2CS_TYPE MyType can always be used.

Example 4 - #define -> string

#DEFINE MyString New World Test!

...gets added to the class area as...

public const string MyString = "New World Test!";
Points of Interest
  • If int.TryParse, float.TryParse, and bool.TryParse all fail then type string is used

Example 5 - simple #define with no value

#DEFINE FullDebug

is slightly modified and moved to the top...

#define FullDebug
Points of Interest
  • not shown, but #define is moved near the top of the C# file (as required by C#)
  • case was change to lowercase

Example 6 - Struct

// C2CS_NS_Write  [StructLayout(LayoutKind.Sequential)]
struct SomeStruct1{unsigned char a; unsigned char b;}; 

...gets added to the namespace area as...

public struct SomeStruct1
    public byte a;
    public byte b;
Points of Interest
  • Here we prefix a // C2CS_NS_Write [StructLayout(LayoutKind.Sequential)] This will cause the struct to be laid out more like a C/C++ struct. Only add this if you need it.
  • Single line structs are supported but they get converted to standard format.
  • Only basic items are supported here like int, short, long, long long, char, char*, unsigned, floats, and doubles.

Example 7 - Struct #2

struct SomeStruct1{
   unsigned long long test123; //some comments
   public long test124;
} someStruct1Instance; // my instance notes

...gets added to the namespace area as...

public struct  SomeStruct1
  public ulong  test123; //some comments
  public long  test124;

...and the following also get added to the class section...

public SomeStruct1  someStruct1Instance;  // my instance notes
Points of Interest
  • “//” style comments are brought over when on the same line
  • Bit fields are not supported at this time

 Example 8 - Enum

public enum MyEnum {
        test1 = 33,
        test2 = 5,
        test3 = test2 };

...gets added to the namespace area as...

enum MyEnum
    test1 = 33,
    test2 = 5,
    test3 = test2,
Points of Interest
  • [Flags] is prefixed only if there are assignments. This was done so that the enum meaning would be the same. This might be changed in the future.

Example 9 - constants/static

protected static char myChar = -100;  // my notes

...gets added to the class area as...

public const SByte myChar = -100;  // my notes
Points of Interest
  • the output is always public const...
  • protected and static are ignored (also private and const are ignored)
  • Values are written to the class section.


Performance was an important component for this project. Since this tool would typically be called with each compile, it is important to keep it fast. I used some RegEx tips that I found, StringBuilders, a fast white-space remover, and a Dictionary to help with this. The conversion is relatively fast. The entire read, convert, and write for the 224-line demo file takes around 12 to 30ms depending on what system I use. Shorter files of about 40 lines take about 5ms.

One thing I learned in some online 'RegEx Tips' is to make sure there is not any catastrophic backtracking. In a nutshell it’s a good idea to be more specific in the RegEx expressions and to avoid the ketch-all ".*".  I had no major issues but I did find being more specific did help performance by about 50% for the demo file. There were some other tips I implemented also that can easily be found online. During the build though, I had a couple opportunities to increase the performance slightly, however, I gave those up for more readable code. 

The file is also only 37kb and this should help out with its performance. 39 copies would fit on one 1986 1.44MB floppy disk. =)


  • Only works with preprocessor directives, constants, structures, and enums.
  • Does not convert any functions (it’s not a full C/C++ to C# converter)
  • Any / * ... * / style of comments are not brought over. In the first pass of the program they are simply removed. They can be used anywhere in the source file but just note that they will never be in the output file.
  • typedef is not supported
  • bitfields are partially supported 
  • char array are not supported

Future Wish list

  • add support for simple function conversions such as: int add(int a, int b){ return (a+b);}
  • add typedef, char array, and additional bitfield support

If you would like to contribute, please feel free to post the changes in the comments or submit a pull request on GitHub. To post on GitHub: (1) Fork the repository to your account by clicking the Fork button. (2) Make the changes and push your changes back to your own branch (3) create a Pull Request to include those changes in the original repository.

Points of Interest

Being able to recognize and parse a C/C++ file so easily and quickly is a great testament to Regular Expressions. While a non-RegEx C/C++/C# parser would have probably had better performance and control, the RegEx solution was much easier and quicker to get running. RegEx is a great tool when the programmer wants to get any pattern matching done quickly and reliably. Without RegEx, the code would have been taken much longer to build and it’s possible that I would have lost interest in the project before I finished it! =)

Other Tools to Try

P/Invoke Interop Assistant - This is a tool that was brought to my attention that does something similar to what cppHeader2CS does. The P/Invoke Interop Assistant is a tool that generates C# or VB P/Invoke code from a c++ file but it also emits structs, enums, #defines, and other items. Depending on your needs, this tool might be a better fit. Here are some advantages of each:

P/Invoke Interop Assistant advantages over cppHeader2CS:

  • windows.h types 
  • p/invoke header generation (the main purpose of the tool)
  • it supports char arrays, typedef, and include files
  • output to VB
  • output in general is better for p/invoke usage
  • there is probably more that I am missing (it's a more powerful/complex tool in general)

Summary: Use Interop Assistant if any of the above requirements are needed. This tool can be run at build time but it is slower and will always update the destination file. Having the destination file updated can be annoying if the file is open as visual studio will prompt you to reload it.

cppHeader2CS advantages:

  • supports more predefs, IA only supports #define
  • supports global constants
  • support custom namespace and class names
  • allows guided output through commands in comments
  • type auto-detection of #define -> const works a little better
  • is faster, around 0.1 sec vs 0.7-3.0 sec (on my system)
  • will not overwrite the output if there are no changes
  • small 36kb file and no installation needed

Summary: Use cppHeader2CS for simpler header files that get modified often and are updated during the build process. This tool does not support char arrays, typedef, custom types, and include files.

Instructions for those that might want to try this tool in place of cppHeader2CS:

  1. go to[^] and download the program
  2. Install the program
  3. In the install folder 'something like C:\Program Files (x86)\InteropSignatureToolkit' there is a file named sigimp.exe and this is the file that is needed. In the 'pre-build event command line' area use something like "C:\Program Files (x86)\InteropSignatureToolkit\sigimp.exe" /genPreProc:yes /lang:cs /out:"$(ProjectDir)MyOutput.cs" "$(ProjectDir)MyInput.h" 

Using T4 Templates - This is another way to perform build time C/C++ to C# conversions. It is just a simple T4 file.  The example in the link below just handles #define to constant conversions and will auto-detect simple integers.   I am including this because this is the tool I used before cppHeader2CS. Link:


  • 5/30/2014 - First working program, #define support only
  • 6/20/2014 - Added more preprocessor support, structs and constant support
  • 6/27/2014 - Added support for source file commands
  • 7/12/2014 - Added #define auto-detect type support
  • 7/21/2014 - Added enum support
  • 7/26/2014 - Renamed from C2CS to CppHeader2CS (C2CS can be misinterpreted as a full C to C# converter)
  • 7/27/2014 - Initial post on CodeProject
  • 10/15/2014
    • same-file custom types are not supported.  "struct A { ... }; struct B { A a;...}" will convert.
    • decimals without suffix now default to double
    • added 'd' suffix support
    • added additional double support
    • added void* support
    • bitfield structs are accepted but bit portion is removed
    • other fixes and code cleanup
  • 5/6/2016
    • Added support to accept Linux/Mac OS X style Line-Feed (\n) line endings
    • Added to GitHub.
  • 5/22/2016 
    • Added support for the 'if defined(...)' style of predefs.
    • Performance: added faster method to remove whitespace.
    • Other: General code/comment cleanups (minor)


This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


About the Author

Ryan S White
Help desk / Support
United States United States
Ryan White is an IT Coordinator, currently living in Pleasanton, California.

He earned his B.S. in Computer Science at California State University East Bay in 2012. Ryan has been writing lines of code since the age of 7 and continues to enjoy programming in his free time.

You can contact Ryan at s u n s e t q u e s t -A-T- h o t m a i l DOT com if you have any questions he can help out with.

Comments and Discussions

Generalhow to convert function declarations? Pin
Southmountain23-Sep-16 10:07
MemberSouthmountain23-Sep-16 10:07 
GeneralRe: how to convert function declarations? Pin
Ryan S White23-Sep-16 19:12
professionalRyan S White23-Sep-16 19:12 
GeneralRe: how to convert function declarations? Pin
Southmountain24-Sep-16 11:44
MemberSouthmountain24-Sep-16 11:44 
GeneralRe: how to convert function declarations? Pin
Ryan S White29-Sep-16 18:07
professionalRyan S White29-Sep-16 18:07 
QuestionConversion fails Pin
eyalasko20-May-16 4:45
Membereyalasko20-May-16 4:45 
AnswerRe: Conversion fails Pin
Ryan S White22-May-16 8:14
professionalRyan S White22-May-16 8:14 
SuggestionHad problems with .h file that only had \n at the end of each line instead of \r\n Pin
varnk6-May-16 11:49
Membervarnk6-May-16 11:49 
GeneralRe: Had problems with .h file that only had \n at the end of each line instead of \r\n Pin
Ryan S White7-May-16 15:15
professionalRyan S White7-May-16 15:15 
GeneralMy vote of 5 Pin
webmaster4424-Aug-15 9:26
Memberwebmaster4424-Aug-15 9:26 
QuestionMarshaling? Pin
Daniel Filipov3-Dec-14 0:35
professionalDaniel Filipov3-Dec-14 0:35 
AnswerRe: Marshaling? Pin
Ryan S White3-Dec-14 8:47
professionalRyan S White3-Dec-14 8:47 
GeneralRe: Marshaling? Pin
Daniel Filipov8-Dec-14 2:22
professionalDaniel Filipov8-Dec-14 2:22 
QuestionMy vote: 0 Pin
VendorX22-Oct-14 10:53
MemberVendorX22-Oct-14 10:53 
The idea isn't new ... there is an open source C++ to CSharp Converter, which is using (for a long time already ...) the same method - I would say surprisingly identical... Thumbs Down | :thumbsdown:
AnswerRe: My vote: 0 Pin
Ryan S White22-Oct-14 18:23
professionalRyan S White22-Oct-14 18:23 
GeneralRe: My vote: 0 Pin
VendorX6-Mar-16 16:35
MemberVendorX6-Mar-16 16:35 
AnswerRe: My vote: 0 Pin
John Torjo18-Nov-15 12:19
professionalJohn Torjo18-Nov-15 12:19 
GeneralMy vote of 5 Pin
Ștefan-Mihai MOGA13-Aug-14 4:15
professionalȘtefan-Mihai MOGA13-Aug-14 4:15 
GeneralRe: My vote of 5 Pin
Ryan S White16-Aug-14 16:22
professionalRyan S White16-Aug-14 16:22 
QuestionWhy not try the P/Invoke Interop Assistant? Pin
jans200531-Jul-14 22:08
Memberjans200531-Jul-14 22:08 
AnswerRe: Why not try the P/Invoke Interop Assistant? Pin
Ryan S White3-Aug-14 7:26
professionalRyan S White3-Aug-14 7:26 
GeneralMy vote of 4 Pin
Member 983417730-Jul-14 3:11
MemberMember 983417730-Jul-14 3:11 
Questionfloat vs double Pin
Philippe Mori29-Jul-14 14:36
MemberPhilippe Mori29-Jul-14 14:36 
AnswerRe: float vs double Pin
Ryan S White29-Jul-14 20:31
professionalRyan S White29-Jul-14 20:31 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.